Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
Prochaine révision
Révision précédente
public:modeles:rotor_08:accueil [2022/09/16 10:16] – ↷ Page déplacée de public:modeles:rotor_8:accueil à public:modeles:rotor_08:accueil alainbataillypublic:modeles:rotor_08:accueil [2023/04/05 09:04] (Version actuelle) – modification externe 127.0.0.1
Ligne 8: Ligne 8:
 <btn type="warning" size="md" modal="modal_en">Downloadable files</btn> <btn type="warning" size="md" modal="modal_en">Downloadable files</btn>
 <modal id="modal_en" title="Open access"> <modal id="modal_en" title="Open access">
-**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/nasa/rotor08|Git project]]**+**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor08|Git project]]**
 </modal>  </modal> 
-===== Original model =====+===== About =====
  
 Rotor 8 is part of a research program to study the effects of blade row solidity on efficiency and stall margin of an axial-flow compressor rotor. It is one of a series of rotors designed to further study the effects of solidity : rotor 8 with a tip solidity of 1.5, rotor 12 with a tip solidity of 1.7 and rotor 14 with a tip solidity of 1.3. Tip solidity are being changed by varying the number of blades while maintaining the same velocity diagrams and flow path. These stages were designed such that the tip solidity of both the rotor and stator blades are the same.  Rotor 8 is part of a research program to study the effects of blade row solidity on efficiency and stall margin of an axial-flow compressor rotor. It is one of a series of rotors designed to further study the effects of solidity : rotor 8 with a tip solidity of 1.5, rotor 12 with a tip solidity of 1.7 and rotor 14 with a tip solidity of 1.3. Tip solidity are being changed by varying the number of blades while maintaining the same velocity diagrams and flow path. These stages were designed such that the tip solidity of both the rotor and stator blades are the same. 
  
-  * Original technical report [(cite:osborn1973design>Osborn. «Performance of a single-stage transonic compressor with a blade-tip solidity of 1.5 and comparison with 1.3- and 1.7-solidity stage » 1973.  {{ https://ntrs.nasa.gov/citations/19740002621|pdf}})]: <code>@TechReport{osborn1973design, +  * Original technical report [(cite:osborn1973design>)]: <code>@TechReport{osborn1973design, 
-author      = {Osborn, Walter M. and Urasek, Donald C. and Moore, R. D.}, +  author           = {Osborn, Walter M. and Urasek, Donald C. and Moore, R. D.}, 
-title       = {Performance of a single-stage transonic compressor with a blade-tip solidity of 1.5 and comparison with 1.3- and 1.7-solidity stages}, +  date             = {1973}, 
-institution = {NASA Lewis Research Center Cleveland, OH, United States}, +  institution      = {NASA Lewis Research Center Cleveland, OH, United States}, 
-note        = {NASA-TM X-2926, url~: \url{https://ntrs.nasa.gov/citations/19740002621}, 1973}}  +  title            = {Performance of a single-stage transonic compressor with a blade-tip solidity of 1.5 and comparison with 1.3- and 1.7-solidity stages}, 
 +  number           = {NASA-TM X-2926}, 
 +  url              {https://ntrs.nasa.gov/citations/19740002621}, 
 +}
 </code> </code>
 +
   * Picture :    * Picture : 
  
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:gene_aubes_nasa_image_rotor8.png?300 |}}+{{ :public:modeles:rotor_8:gene_aubes_nasa_image_rotor8.png?300 |}}
 <caption>Fig1. https://ntrs.nasa.gov/citations/19740002621 p.67 </caption> <caption>Fig1. https://ntrs.nasa.gov/citations/19740002621 p.67 </caption>
  
-  
  
-===== Useful documents  =====+<callout type="info" icon="true" title="Useful documents">  
 +  * [[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor08|downloadable models]] (Git project) 
 +  * {{ :public:modeles:rotor_8:rotor8.pdf  | NASA technical report}} (.pdf) 
 +  * {{ :public:modeles:rotor_8:rotor8_original.csv | geometrical parameters file}} (.csv), usable as input of OpenMCAD[(cite:Kojtych_2022_gene_aubes>Kojtych S., Batailly A. «OpenMCAD, an open blade generator: from Multiple-Circular-Arc profiles to Computer-Aided Design model» 2022. {{ https://hal.science/hal-03923093|open source code}})] to generate reference blade models. 
 +</callout> 
 + 
 + 
 +===== Reference blade =====
  
-  PDF of the NASA report : {{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:rotor8.pdf |}} +The **reference blade** is defined with multiple-circular arc profiles[(cite:Crouse_1969_computer)] given in the original NASA report[(cite:osborn1973design)]Corresponding models are computed with the open-source code OpenMCAD[(cite:Kojtych_2022_gene_aubes)].
-  * CSV file of the blade geometry : {{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:rotor8_original.csv |}}+
  
-===== Geometry =====+==== Geometry ====
  
 The geometry of rotor 8 is described in the [[https://ntrs.nasa.gov/citations/19740002621|original NASA report]]  by the following tables. The length are in centimeters and the angles in degrees. The geometry of rotor 8 is described in the [[https://ntrs.nasa.gov/citations/19740002621|original NASA report]]  by the following tables. The length are in centimeters and the angles in degrees.
  
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:gene_aubes_nasa_geom_rotor8.png?400 |}}+{{ :public:modeles:rotor_8:gene_aubes_nasa_geom_rotor8.png?400 |}}
  
-===== Aerodynamic design  =====+==== Aerodynamic design  ====
  
-^                      ^  unit  ^ values  ^+^                      ^  unit  ^ value  ^
 ^ pressure ratio  |  [-]     | 1.75    | ^ pressure ratio  |  [-]     | 1.75    |
 ^ mass flow        [kg/s]  | 29.5    | ^ mass flow        [kg/s]  | 29.5    |
Ligne 49: Ligne 58:
 ^ rotative speed  |  [rad/s]  | 1686 | ^ rotative speed  |  [rad/s]  | 1686 |
  
-===== Material properties  =====+==== Material properties  ====
  
-The original material of the rotor 8 is not defined in the NASA report. 
  
-Considered properties: Ti-6Al-4V, generic titanium :+The material of rotor 8 is not defined in the original NASA report. A generic titanium Ti-6Al-4V is considered
  
-^                         ^  unité    valeurs             ^+^                         ^  unit    value             ^
 ^ alloy                |  [-]      | Ti-6Al-4V  | ^ alloy                |  [-]      | Ti-6Al-4V  |
 ^ Young's modulus          |  [GPa]    | 108                 | ^ Young's modulus          |  [GPa]    | 108                 |
Ligne 62: Ligne 70:
 ^ yield stress        |  [GPa]    | 0.824               | ^ yield stress        |  [GPa]    | 0.824               |
  
-First three natural frequencies (with clamped root) for the mesh: 
-     - <fc #c0c0c0>(1B)</fc>: 1802.3 rad/s  / 286.8 Hz 
-     - <fc #c0c0c0>(2B)</fc>: 6522.4 rad/s / 1038.1 Hz 
-     - <fc #c0c0c0>(1T)</fc>: 8772.5 rad/s / 1396.2 Hz 
  
-===== CAD =====+==== CAD model ==== 
 + 
 +The CAD model is computed with the open source code OpenMCAD[(cite:Kojtych_2022_gene_aubes)]. 
 + 
 +<grid> 
 +<col md="2"> 
 +</col> 
 +<col md="4"> 
 +{{ :public:modeles:rotor_08:8_intra.png?200 |}} 
 + <caption>pressure side</caption> 
 +</col> 
 +<col md="4"> 
 +{{ :public:modeles:rotor_08:8_extra.png?200 |}} 
 +<caption>suction side</caption> 
 +</col> 
 +<col md="2"> 
 +</col> 
 +</grid> 
 + 
 + 
 +==== Natural frequencies ==== 
 + 
 + 
 +First three natural frequencies (with clamped root) for the mesh computed with OpenMCAD[(cite:Kojtych_2022_gene_aubes)]: 
 + 
 +^ Mode  ^ Type  ^ Natural angular frequency (rad/sec)  ^ Natural frequency (Hz)  ^ 
 +| 1     |1B       | 1779.57                     | 283.228                  | 
 +| 2     |2B        | 6407.97                     | 1019.86                  | 
 +| 3     |1T        | 8746.82                     | 1392.1                  | 
 + 
 + 
 + 
 +===== Initial blade ===== 
 + 
 +The **initial blade** is defined with in-house LAVA parameters[(cite:Kojtych_2022_Methodology)] computed from the reference blade CAD model. The initial blade is usually used as starting point for an optimization process. Its geometry is similar to the one of the reference blade. 
 + 
 + 
 + 
 + 
 +===Natural frequencies ==== 
 + 
 +First three natural frequencies (with clamped root) 
 + 
 +  * from the whole mesh: 
 + 
 +^ Mode  ^ Type  ^ Natural angular frequency (rad/sec)  ^ Natural frequency (Hz)  ^ 
 +| 1     | 1B       | 1778.69                     | 283.088                 | 
 +| 2     | 2B       | 6413.56                     | 1020.75                  | 
 +| 3     | 1T       | 8747.83                     | 1392.26                 | 
 + 
 +  * from the reduced order model: 
 + 
 +^ Mode  ^ Type  ^ Natural angular frequency (rad/sec)  ^ Natural frequency (Hz)  ^ 
 +| 1     | 1B      | 1778.75                     | 283.098                  | 
 +| 2     | 2B      | 6416.20                     | 1021.17                 | 
 +| 3     | 1T      | 8750.91                      | 1392.75                 | 
  
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:gene_aubes_nasa_rotor8_cao.png?400 |}} 
  
 </pane> </pane>
 +
    
 <pane id="tab-fr"> <pane id="tab-fr">
Ligne 77: Ligne 137:
 <btn type="warning" size="md" modal="modal_fr">Fichiers téléchargeables</btn> <btn type="warning" size="md" modal="modal_fr">Fichiers téléchargeables</btn>
 <modal id="modal_fr" title="Libre accès"> <modal id="modal_fr" title="Libre accès">
-**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/nasa/rotor08|lien vers le projet Git]]**+**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor08|lien vers le projet Git]]**
 </modal> </modal>
  
-===== Modèle original =====+===== À propos =====
  
 Le rotor 8 fait partie d'un programme de recherche visant à étudier les effets de la solidité des rangées d'aubes sur l'efficacité et la marge de décrochage d'un rotor de compresseur à flux axial. Il fait partie d'une série de rotors conçus pour étudier plus profondément les effets de la solidité : le rotor 8 avec une solidité en tête de 1.5, le rotor 12 avec une solidité en tête de 1.7 et le rotor 14 avec une solidité en tête de 1.3. La solidité  est modifiée en faisant varier le nombre d'aubes tout en conservant les mêmes triangles de vitesse et le même trajet d'écoulement. Ces étages ont été conçus de manière à ce que la solidité en tête du rotor et du stator soit la même. Le rotor 8 fait partie d'un programme de recherche visant à étudier les effets de la solidité des rangées d'aubes sur l'efficacité et la marge de décrochage d'un rotor de compresseur à flux axial. Il fait partie d'une série de rotors conçus pour étudier plus profondément les effets de la solidité : le rotor 8 avec une solidité en tête de 1.5, le rotor 12 avec une solidité en tête de 1.7 et le rotor 14 avec une solidité en tête de 1.3. La solidité  est modifiée en faisant varier le nombre d'aubes tout en conservant les mêmes triangles de vitesse et le même trajet d'écoulement. Ces étages ont été conçus de manière à ce que la solidité en tête du rotor et du stator soit la même.
  
   * Rapport technique original [(cite:osborn1973design>Osborn. «Performance of a single-stage transonic compressor with a blade-tip solidity of 1.5 and comparison with 1.3- and 1.7-solidity stage » 1973.  {{ https://ntrs.nasa.gov/citations/19740002621|pdf}})]: <code>@TechReport{osborn1973design,   * Rapport technique original [(cite:osborn1973design>Osborn. «Performance of a single-stage transonic compressor with a blade-tip solidity of 1.5 and comparison with 1.3- and 1.7-solidity stage » 1973.  {{ https://ntrs.nasa.gov/citations/19740002621|pdf}})]: <code>@TechReport{osborn1973design,
-author      = {Osborn, Walter M. and Urasek, Donald C. and Moore, R. D.}, +  author           = {Osborn, Walter M. and Urasek, Donald C. and Moore, R. D.}, 
-title       = {Performance of a single-stage transonic compressor with a blade-tip solidity of 1.5 and comparison with 1.3- and 1.7-solidity stages}, +  date             = {1973}, 
-institution = {NASA Lewis Research Center Cleveland, OH, United States}, +  institution      = {NASA Lewis Research Center Cleveland, OH, United States}, 
-note        = {NASA-TM X-2926, url~: \url{https://ntrs.nasa.gov/citations/19740002621}, 1973}}  +  title            = {Performance of a single-stage transonic compressor with a blade-tip solidity of 1.5 and comparison with 1.3- and 1.7-solidity stages}, 
 +  number           = {NASA-TM X-2926}, 
 +  url              {https://ntrs.nasa.gov/citations/19740002621}, 
 +}
 </code> </code>
 +
   * Photographie :   * Photographie :
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:gene_aubes_nasa_image_rotor8.png?300 |}}+{{ :public:modeles:rotor_8:gene_aubes_nasa_image_rotor8.png?300 |}}
 <caption>Fig1. https://ntrs.nasa.gov/citations/19740002621 p.67 </caption> <caption>Fig1. https://ntrs.nasa.gov/citations/19740002621 p.67 </caption>
  
  
-===== Documents utiles  =====+<callout type="info" icon="true" title="Documents utiles">  
 +  * [[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor08|modèles téléchargeables]] (lien vers projet Git) 
 +  * {{ :public:modeles:rotor_8:rotor8.pdf | rapport technique original}} de la NASA (.pdf) 
 +  * {{ :public:modeles:rotor_8:rotor8_original.csv | fichier de paramètres géométriques}} (.csv), utilisable en entrée de OpenMCAD[(cite:Kojtych_2022_gene_aubes>)] pour générer l'aube de référence  
 +</callout>
  
-  * PDF du rapport de la NASA : {{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:rotor8.pdf |}} 
-  * Fichier CSV de la géométrie : {{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:rotor8_original.csv |}} 
  
-===== Géométrie =====+ 
 +===== Aube de référence ===== 
 + 
 +L'**aube de référence** est définie par des profils de type arcs circulaires multiples[(cite:Crouse_1969_computer>Crouse //et al//. «A computer program for composing compressor blading from simulated circular-arc elements on conical surfaces » 1969. NASA-TN-D-5437. {{ https://ntrs.nasa.gov/citations/19690027504|pdf}})], donnés dans le rapport technique original de la NASA[(cite:osborn1973design)]. Les modèles associés sont obtenus avec le code en libre accès OpenMCAD[(cite:Kojtych_2022_gene_aubes)]. 
 + 
 +==== Géométrie ====
  
 La géométrie du rotor 8 est décrite dans le [[https://ntrs.nasa.gov/citations/19740002621|rapport d'origine de la NASA]] par les tableaux suivants. Les grandeurs sont en centimètres et en degrés. La géométrie du rotor 8 est décrite dans le [[https://ntrs.nasa.gov/citations/19740002621|rapport d'origine de la NASA]] par les tableaux suivants. Les grandeurs sont en centimètres et en degrés.
  
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:gene_aubes_nasa_geom_rotor8.png?400 |}}+{{ :public:modeles:rotor_8:gene_aubes_nasa_geom_rotor8.png?400 |}}
  
-===== Caractéristiques aérodynamiques  =====+==== Caractéristiques aérodynamiques  ====
 ^                      ^  unités  ^ valeurs  ^ ^                      ^  unités  ^ valeurs  ^
 ^ taux de compression  |  [-]     | 1,75     | ^ taux de compression  |  [-]     | 1,75     |
Ligne 117: Ligne 188:
  
  
-===== Propriétés matériau  =====+==== Propriétés matériau  ====
  
-Le matériau original du rotor 8 n'est pas défini dans le rapport de la NASA. +Le matériau original du rotor 8 n'est pas défini dans le rapport de la NASA. Un alliage de titane Ti-6Al-4v est considéré
- +
-Propriétés considérées :  alliage de titane Ti-6Al-4v :+
  
 ^                          unité    ^ valeurs             ^ ^                          unité    ^ valeurs             ^
Ligne 131: Ligne 200:
  
  
-Fréquences des trois premiers modes (noeuds de la base encastrés) pour le maillage : 
-     - <fc #c0c0c0>(1B)</fc>: 1802,3 rad/s  / 286,8 Hz 
-     - <fc #c0c0c0>(2B)</fc>: 6522,4 rad/s / 1038,1 Hz 
-     - <fc #c0c0c0>(1T)</fc>: 8772,5 rad/s / 1396,2 Hz 
  
-===== CAO =====+==== Modèle CAO ==== 
 + 
 +Le modèle CAO est obtenu avec OpenMCAD[(cite:Kojtych_2022_gene_aubes)]. 
 + 
 +<grid> 
 +<col md="2"> 
 +</col> 
 +<col md="4"> 
 +{{ :public:modeles:rotor_08:8_intra.png?200 |}} 
 + <caption>intrados</caption> 
 +</col> 
 +<col md="4"> 
 +{{ :public:modeles:rotor_08:8_extra.png?200 |}} 
 +<caption>extrados</caption> 
 +</col> 
 +<col md="2"> 
 +</col> 
 +</grid> 
 + 
 +==== Fréquences propres ==== 
 + 
 +Fréquences des trois premiers modes (noeuds du pied d'aube encastrés) pour le maillage obtenu avec OpenMCAD[(cite:Kojtych_2022_gene_aubes)] : 
 + 
 +^ Mode  ^ Type  ^ Pulsation propre (rad/sec)  ^ Fréquence propre (Hz)  ^ 
 +| 1     | 1F      | 1779,57                     | 283,228                  | 
 +| 2     | 2F       | 6407,97                     | 1019,86                  | 
 +| 3     | 1T       | 8746,82                     | 1392,                 | 
 + 
 + 
 +===== Aube initiale ===== 
 + 
 +L'**aube initiale** est définie par des paramètres spécifiques au LAVA[(cite:Kojtych_2022_Methodology>Kojtych S. //et al//. «Methodology for the Redesign of Compressor Blades Undergoing Nonlinear Structural Interactions: Application to Blade-Tip/Casing Contacts » 2022. Journal of Engineering for Gas Turbines and Power, Vol. 145, No. 5. {{ https://hal.archives-ouvertes.fr/hal-03795257|pdf}})] obtenus à partir du modèle CAO de l'aube de référence. L'aube initiale est classiquement utilisée comme point de départ dans le cadre de procédures d'optimisation; sa géométrie est similaire à celle de l'aube de référence. 
 + 
 + 
 +===Fréquences propres ==== 
 +Fréquences des trois premiers modes (noeuds du pied d'aube encastrés), 
 + 
 +  * pour le maillage complet : 
 + 
 +^ Mode  ^ Type  ^ Pulsation propre (rad/sec)  ^ Fréquence propre (Hz)  ^ 
 +| 1     | 1F      | 1778,69                     | 283,088                 | 
 +| 2     | 2F       | 6413,56                     | 1020,75                  | 
 +| 3     | 1T       | 8747,83                     | 1392,26                 | 
 + 
 + 
 +  * pour le modèle réduit : 
 + 
 +^ Mode  ^ Type  ^ Pulsation propre (rad/sec)  ^ Fréquence propre (Hz)  ^ 
 +| 1     | 1F       | 1778,75                     | 283,098                  | 
 +| 2     | 2F       | 6416,20                     | 1021,17                 | 
 +| 3     | 1T       | 8750,91                      | 1392,75                 |
  
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_8:gene_aubes_nasa_rotor8_cao.png?400 |}} 
  
  
 </pane> </pane>
-</tabs> 
  
 +</tabs>
  
  
  • public/modeles/rotor_08/accueil.1663337784.txt.gz
  • Dernière modification : 2023/04/05 08:59
  • (modification externe)