Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentes Révision précédente
Prochaine révision
Révision précédente
public:modeles:rotor_23b:accueil [2022/09/16 10:13] – ↷ Page déplacée de ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:accueil à public:modeles:rotor_23b:accueil alainbataillypublic:modeles:rotor_23b:accueil [2023/04/15 13:39] (Version actuelle) – [Material properties] ikrambeghdadi
Ligne 8: Ligne 8:
 <btn type="warning" size="md" modal="modal_en">Downloadable files</btn> <btn type="warning" size="md" modal="modal_en">Downloadable files</btn>
 <modal id="modal_en" title="Open access"> <modal id="modal_en" title="Open access">
-**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/nasa/rotor23b|Git project]]**+**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor23b|Git project]]**
 </modal>  </modal> 
-===== Original model =====+===== About =====
  
 Rotor 23B is part of a research program to study the effects of aspect ratio, diffusion factor, and solidity on rotors. To do so, experimental studies have been conducted on a series of high-hub-tip-radius-ratio compressor stages representative of the middle and latter stages of axial-flow compressors. In fact, 14 middle stages were tested to assess the effects on performance of varying both diffusion through the rotor and stator blades and blade aspect ratio. Among these 14 stages, there are rotors 23B, 24A, 25A, 26B, 27A and 28B. Both the tip diameter and the hub-tip radius ratio were held constant throughout each stage at 50.8 centimeters and 0.8, respectively. Rotor 23B is part of a research program to study the effects of aspect ratio, diffusion factor, and solidity on rotors. To do so, experimental studies have been conducted on a series of high-hub-tip-radius-ratio compressor stages representative of the middle and latter stages of axial-flow compressors. In fact, 14 middle stages were tested to assess the effects on performance of varying both diffusion through the rotor and stator blades and blade aspect ratio. Among these 14 stages, there are rotors 23B, 24A, 25A, 26B, 27A and 28B. Both the tip diameter and the hub-tip radius ratio were held constant throughout each stage at 50.8 centimeters and 0.8, respectively.
  
-  * Original technical report [(cite:britsch1979design>Britsch«Design and overall performance of four highly loaded, high speed inlet stages for an advanced high-pressure-ratio core compressor » 1979.  {{ https://ntrs.nasa.gov/citations/19790025039|pdf}})]: <code>@TechReport{britsch1979design, +  * Original technical report [(cite:britsch1979design>Britsch //et al// «Design and overall performance of four highly loaded, high speed inlet stages for an advanced high-pressure-ratio core compressor » 1979.  {{ https://ntrs.nasa.gov/citations/19790025039|pdf}})]: <code>@TechReport{britsch1979design, 
-author      = {Britsch, Werner R. and Osborn, Walter M. and Laessig, Mark R.}, +  author           = {Britsch, Werner R. and Osborn, Walter M. and Laessig, Mark R.}, 
-title       = {Effects of Diffusion Factor, Aspect Ratio, and Solidity on Overall Performance of 14 Compressor Middle Stages}, +  date             = {1979}, 
-institution = {NASA Lewis Research Center Cleveland, OH, United States}, +  institution      = {NASA Lewis Research Center Cleveland, OH, United States}, 
-note        = {NASA-TP-1523, url~: \url{https://ntrs.nasa.gov/citations/19790025039}, 1979 }}  +  title            = {Effects of Diffusion Factor, Aspect Ratio, and Solidity on Overall Performance of 14 Compressor Middle Stages}, 
 +  number           = {NASA-TP-1523}, 
 +  url              {https://ntrs.nasa.gov/citations/19790025039} 
 +  }  
 </code> </code>
   * Picture :    * Picture : 
- +{{ :public:modeles:rotor_23b:gene_aubes_nasa_image_rotor23b.png?300 |}} 
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:gene_aubes_nasa_image_rotor23b.png?300 |}} +<caption>Fig1. https://catalog.archives.gov/id/17446275</caption> 
-<caption>https://catalog.archives.gov/id/17446275</caption> +  *  <code>@Misc{brown1975records, 
- <code>@Misc{brown1975records, +author   = {Brown, M.},
-author   = {BROWN, M.},+
 title    = {Rotor 23B - Stator 20B. {R}ecords of the {N}ational {A}eronautics and {S}pace {A}dministration, 1903 - 2006. {P}hotographs relating to agency activities, facilities and personnel, 1973 - 2013}, title    = {Rotor 23B - Stator 20B. {R}ecords of the {N}ational {A}eronautics and {S}pace {A}dministration, 1903 - 2006. {P}hotographs relating to agency activities, facilities and personnel, 1973 - 2013},
-note     {\href{https://catalog.archives.gov/id/17446275}{https://catalog.archives.gov/id/17446275}, 1975 }, % for Fig. 1}+url      = {https://catalog.archives.gov/id/17446275}}
 </code> </code>
  
 +<callout type="info" icon="true" title="Useful documents"> 
 +  * [[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor23b|downloadable models]] (Git project)
 +  * {{ :public:modeles:rotor_23b:rotor23b.pdf | NASA technical report}} (.pdf)
 +  * {{ :public:modeles:rotor_23b:rotor23b_original.csv | geometrical parameters file}} (.csv), usable as input of OpenMCAD[(cite:Kojtych_2022_gene_aubes>Kojtych S., Batailly A. «OpenMCAD, an open blade generator: from Multiple-Circular-Arc profiles to Computer-Aided Design model» 2022. {{ https://hal.science/hal-03923093|open source code}})] to generate reference blade models.
 +</callout>
 +
 +
 +===== Reference blade =====
  
-===== Useful documents  =====+The **reference blade** is defined with multiple-circular arc profiles[(cite:Crouse_1969_computer)] given in the original NASA report[(cite:britsch1979design)]. Corresponding models are computed with the open-source code OpenMCAD[(cite:Kojtych_2022_gene_aubes)].
  
-  * PDF of the NASA report : {{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:rotor23b.pdf |}} 
-  * CSV file of the blade geometry : {{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:rotor23b_original.csv |}} 
  
-===== Geometry =====+==== Geometry ====
  
 The geometry of rotor 23B is described in the [[https://ntrs.nasa.gov/citations/19790025039|original NASA report]]  by the following tables. The length are in centimeters and the angles in degrees. The geometry of rotor 23B is described in the [[https://ntrs.nasa.gov/citations/19790025039|original NASA report]]  by the following tables. The length are in centimeters and the angles in degrees.
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:gene_aubes_nasa_geom_rotor23b.png?400 |}}+{{ :public:modeles:rotor_23b:gene_aubes_nasa_geom_rotor23b.png?400 |}}
  
-===== Aerodynamic design  =====+==== Aerodynamic design  ====
  
-^                      ^  unit  ^ values  ^+^                      ^  unit  ^ value  ^
 ^ pressure ratio  |  [-]     | 1.257     | ^ pressure ratio  |  [-]     | 1.257     |
 ^ mass flow        [kg/s]  | 9.46     | ^ mass flow        [kg/s]  | 9.46     |
Ligne 51: Ligne 59:
 ^ number of blades        [-]     | 50      | ^ number of blades        [-]     | 50      |
 ^ rotative speed  |  [rad/s]  | 960.28 | ^ rotative speed  |  [rad/s]  | 960.28 |
 +
 ===== Material properties  ===== ===== Material properties  =====
  
-The original material of the rotor 23B is not defined in the NASA report.+The original material of the rotor 23B is not defined in the NASA report. A generic titanium Ti-6Al-4V is considered:
  
-Considered properties: 200-grade maraging steel :+^                          unit    ^ value             ^ 
 +^ alloy                |  [-]      | Ti-6Al-4V 
 +^ Young's modulus          |  [GPa]    | 108                 | 
 +^ density          [kg/m3]  | 4400| 
 +^ Poisson's ratio  |  [-]      | 0.34                 | 
 +^ yield stress        |  [GPa]    | 0.824               |
  
-^                          unité    ^ valeurs             ^ 
-^ alloy                |  [-]      | 18-Ni-200-maraging  | 
-^ Young's modulus          |  [GPa]    | 180                 | 
-^ density          [kg/m3]  | 8000                | 
-^ Poisson's ratio  |  [-]      | 0.3                 | 
-^ yield stress        |  [GPa]    | 1.38                | 
  
-First three natural frequencies (with clamped root) for the mesh: +==== CAD model ====
-     - <fc #c0c0c0>(1B)</fc>: 7194.7 rad/s  / 1145.1 Hz +
-     - <fc #c0c0c0>(1T)</fc>: 15383.6 rad/s / 2448.4 Hz +
-     - <fc #c0c0c0>(2B)</fc>: 28053.6 rad/s / 4464.9 Hz+
  
 +The CAD model is computed with the open source code OpenMCAD[(cite:Kojtych_2022_gene_aubes)].
  
-===== CAD =====+<grid> 
 +<col md="2"> 
 +</col> 
 +<col md="4"> 
 +{{ :public:modeles:rotor_23b:23b_intra.png?200 |}} 
 + <caption>pressure side</caption> 
 +</col> 
 +<col md="4"> 
 +{{ :public:modeles:rotor_23b:23b_extra.png?200 |}} 
 +<caption>suction side</caption> 
 +</col> 
 +<col md="2"> 
 +</col> 
 +</grid> 
 + 
 + 
 +==== Natural frequencies ==== 
 + 
 + 
 +First three natural frequencies (with clamped root) for the mesh computed with OpenMCAD[(cite:Kojtych_2022_gene_aubes)]: 
 + 
 +^ Mode  ^ Type  ^ Natural angular frequency (rad/sec)  ^ Natural frequency (Hz)  ^ 
 +| 1     | 1B   | 6548.4                       | 1042.21                 | 
 +| 2     | 1T   | 15063.74                     | 2397.47                  | 
 +| 3     | 2B    | 28660.44                     | 4561.45                  | 
 + 
 + 
 + 
 +===== Initial blade ===== 
 + 
 +The **initial blade** is defined with in-house LAVA parameters[(cite:Kojtych_2022_Methodology)] computed from the reference blade CAD model. The initial blade is usually used as starting point for an optimization process. Its geometry is similar to the one of the reference blade. 
 + 
 + 
 + 
 + 
 +===Natural frequencies ==== 
 + 
 +First three natural frequencies (with clamped root) 
 + 
 +  * from the whole mesh: 
 + 
 +^ Mode  ^ Type  ^ Natural angular frequency (rad/sec)  ^ Natural frequency (Hz)  ^ 
 +| 1     | 1B    | 6612.49                      | 1052.41                  | 
 +| 2     | 1T    | 15121.8                      | 2406.71                  | 
 +| 3     | 2B    | 28889.33                     | 4597.88                  | 
 + 
 + 
 +  * from the reduced order model: 
 + 
 +^ Mode  ^ Type  ^ Natural angular frequency (rad/sec)  ^ Natural frequency (Hz)  ^ 
 +| 1     | 1B    | 6613.05                     | 1052.5                  | 
 +| 2     | 1T   | 15126.14                    | 2407.4                  | 
 +| 3     | 2B    | 28946.25                    | 4606.94                 |
  
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:gene_aubes_nasa_rotor23b_cao.png?600 |}} 
  
  
Ligne 81: Ligne 138:
 <btn type="warning" size="md" modal="modal_fr">Fichiers téléchargeables</btn> <btn type="warning" size="md" modal="modal_fr">Fichiers téléchargeables</btn>
 <modal id="modal_fr" title="Libre accès"> <modal id="modal_fr" title="Libre accès">
-**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/nasa/rotor23b|lien vers le projet Git]]**+**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor23b|lien vers le projet Git]]**
 </modal> </modal>
  
-===== Modèle original =====+===== À propos =====
  
-Le rotor 23B fait partie d'un programme de recherche visant à étudier les effets de l’allongement, du facteur de diffusion et de la solidité des rotors. Pour ce faire, des études expérimentales ont été menées sur une série d'étages de compresseurs à fort rapport entre les rayons du moyeu et de la tête d’aube, représentatifs des étages moyens et avancés des compresseurs à flux axial. En effet, 14 étages intermédiaires ont été testés pour évaluer les effets sur les performances de la variation de la diffusion et de l’allongement des aubes. Parmi ces 14 étages, on trouve les rotors 23B, 24A, 25A, 26B, 27A et 28B. Le diamètre de l'extrémité des aubes et le rapport entre les rayons du moyeu et de la tête d’aube ont été maintenus constants tout au long de chaque étage à 50.8 centimètres et 0.8respectivement.+Le rotor 23B fait partie d'un programme de recherche visant à étudier les effets de l’allongement, du facteur de diffusion et de la solidité des rotors. Pour ce faire, des études expérimentales ont été menées sur une série d'étages de compresseurs à fort rapport entre les rayons du moyeu et de la tête d’aube, représentatifs des étages moyens et avancés des compresseurs à flux axial. En effet, 14 étages intermédiaires ont été testés pour évaluer les effets sur les performances de la variation de la diffusion et de l’allongement des aubes. Parmi ces 14 étages, on trouve les rotors 23B, 24A, 25A, 26B, 27A et 28B. Le diamètre de l'extrémité des aubes et le rapport entre les rayons du moyeu et de la tête d’aube ont été maintenus constants tout au long de chaque étage, respectivement à 50,8 centimètres et 0,8.
  
  
-  * Rapport technique original [(cite:britsch1979design>Britsch. «Design and overall performance of four highly loaded, high speed inlet stages for an advanced high-pressure-ratio core compressor » 1979.  {{ https://ntrs.nasa.gov/citations/19790025039|pdf}})]: <code>@TechReport{britsch1979design, +  * Rapport technique original [(cite:britsch1979design>)]: <code>@TechReport{britsch1979design, 
-author      = {Britsch, Werner R. and Osborn, Walter M. and Laessig, Mark R.}, +  author           = {Britsch, Werner R. and Osborn, Walter M. and Laessig, Mark R.}, 
-title       = {Effects of Diffusion Factor, Aspect Ratio, and Solidity on Overall Performance of 14 Compressor Middle Stages}, +  date             = {1979}, 
-institution = {NASA Lewis Research Center Cleveland, OH, United States}, +  institution      = {NASA Lewis Research Center Cleveland, OH, United States}, 
-note        = {NASA-TP-1523, url~: \url{https://ntrs.nasa.gov/citations/19790025039}, 1979 }}  +  title            = {Effects of Diffusion Factor, Aspect Ratio, and Solidity on Overall Performance of 14 Compressor Middle Stages}, 
 +  number           = {NASA-TP-1523}, 
 +  url              {https://ntrs.nasa.gov/citations/19790025039} 
 +  }  
 </code> </code>
   * Photographie :   * Photographie :
- +{{ :public:modeles:rotor_23b:gene_aubes_nasa_image_rotor23b.png?300 |}} 
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:gene_aubes_nasa_image_rotor23b.png?300 |}} +<caption>Fig1. https://catalog.archives.gov/id/17446275</caption> 
-<caption>https://catalog.archives.gov/id/17446275</caption> +  *  <code>@Misc{brown1975records, 
- <code>@Misc{brown1975records, +author   = {Brown, M.},
-author   = {BROWN, M.},+
 title    = {Rotor 23B - Stator 20B. {R}ecords of the {N}ational {A}eronautics and {S}pace {A}dministration, 1903 - 2006. {P}hotographs relating to agency activities, facilities and personnel, 1973 - 2013}, title    = {Rotor 23B - Stator 20B. {R}ecords of the {N}ational {A}eronautics and {S}pace {A}dministration, 1903 - 2006. {P}hotographs relating to agency activities, facilities and personnel, 1973 - 2013},
-note     {\href{https://catalog.archives.gov/id/17446275}{https://catalog.archives.gov/id/17446275}, 1975 }, % for Fig. 1}+url      = {https://catalog.archives.gov/id/17446275}}
 </code> </code>
-===== Documents utiles  ===== 
  
-  * PDF du rapport de la NASA : {{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:rotor23b.pdf |}} 
-  * Fichier CSV de la géométrie : {{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:rotor23b_original.csv |}} 
  
-===== Géométrie =====+<callout type="info" icon="true" title="Documents utiles">  
 +  * [[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor23b|modèles téléchargeables]] (lien vers projet Git) 
 +  * {{ :public:modeles:rotor_23b:rotor23b.pdf | rapport technique original}} de la NASA (.pdf) 
 +  * {{ :public:modeles:rotor_23b:rotor23b_original.csv | fichier de paramètres géométriques}} (.csv), utilisable en entrée de OpenMCAD[(cite:Kojtych_2022_gene_aubes>)] pour générer l'aube de référence  
 +</callout> 
 + 
 + 
 +===== Aube de référence ===== 
 + 
 +L'**aube de référence** est définie par des profils de type arcs circulaires multiples[(cite:Crouse_1969_computer>Crouse //et al//. «A computer program for composing compressor blading from simulated circular-arc elements on conical surfaces » 1969. NASA-TN-D-5437. {{ https://ntrs.nasa.gov/citations/19690027504|pdf}})], donnés dans le rapport technique original de la NASA[(cite:britsch1979design)]. Les modèles associés sont obtenus avec le code en libre accès OpenMCAD[(cite:Kojtych_2022_gene_aubes)]. 
 + 
 +==== Géométrie ====
  
 La géométrie du rotor 23B est décrite dans le [[https://ntrs.nasa.gov/citations/19790025039|rapport d'origine de la NASA]] par les tableaux suivants. Les grandeurs sont en centimètres et en degrés. La géométrie du rotor 23B est décrite dans le [[https://ntrs.nasa.gov/citations/19790025039|rapport d'origine de la NASA]] par les tableaux suivants. Les grandeurs sont en centimètres et en degrés.
  
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:gene_aubes_nasa_geom_rotor23B.png?400 |}}+{{ :public:modeles:rotor_23b:gene_aubes_nasa_geom_rotor23B.png?400 |}}
  
-===== Caractéristiques aérodynamiques  =====+==== Caractéristiques aérodynamiques  ====
 ^                      ^  unités  ^ valeurs  ^ ^                      ^  unités  ^ valeurs  ^
 ^ taux de compression  |  [-]     | 1,257     | ^ taux de compression  |  [-]     | 1,257     |
Ligne 127: Ligne 194:
 ===== Propriétés matériau  ===== ===== Propriétés matériau  =====
  
-Le matériau original du rotor 23B n'est pas défini dans le rapport de la NASA. +Le matériau original du rotor 23B n'est pas défini dans le rapport de la NASA. Un alliage de titane Ti-6Al-4v est considéré :
- +
-Propriétés considérées : un acier maraging de grade 200 :+
  
 ^                          unité    ^ valeurs             ^ ^                          unité    ^ valeurs             ^
-^ alliage                  [-]      | 18-Ni-200-maraging  +^ alliage                  [-]      | Ti-6Al-4v 
-^ module d'Young          |  [GPa]    | 180                 | +^ module d'Young          |  [GPa]    | 108                 | 
-^ masse volumique          [kg/m3] 8000                | +^ masse volumique          [kg/m3] 4400                | 
-^ coefficient de Poisson  |  [-]      | 0,                | +^ coefficient de Poisson  |  [-]      | 0,34                 | 
-^ limite élastique        |  [GPa]    | 1,38                |+^ limite élastique        |  [GPa]    | 0,824                |
  
-Fréquences des trois premiers modes (noeuds de la base encastrés) pour le maillage : 
-     - <fc #c0c0c0>(1B)</fc>: 7194,7 rad/s  / 1145,1 Hz 
-     - <fc #c0c0c0>(1T)</fc>: 15383,6 rad/s / 2448,4 Hz 
-     - <fc #c0c0c0>(2B)</fc>: 28053,6 rad/s / 4464,9 Hz 
  
 +==== Modèle CAO ====
  
-===== CAO =====+Le modèle CAO est obtenu avec OpenMCAD[(cite:Kojtych_2022_gene_aubes)].
  
-{{ :ressources:logiciels:gene_aubes_nasa:geneaubeslisteaubes:rotor_23b:gene_aubes_nasa_rotor23b_cao.png?600 |}}+<grid> 
 +<col md="2"> 
 +</col> 
 +<col md="4"> 
 +{{ :public:modeles:rotor_23b:23b_intra.png?200 |}} 
 + <caption>intrados</caption> 
 +</col> 
 +<col md="4"> 
 +{{ :public:modeles:rotor_23b:23b_extra.png?200 |}} 
 +<caption>extrados</caption> 
 +</col> 
 +<col md="2"> 
 +</col> 
 +</grid>
  
-</pane> +==== Fréquences propres ====
-</tabs>+
  
 +Fréquences des trois premiers modes (noeuds du pied d'aube encastrés) pour le maillage obtenu avec OpenMCAD[(cite:Kojtych_2022_gene_aubes)] :
  
 +^ Mode  ^ Type  ^ Pulsation propre (rad/sec)  ^ Fréquence propre (Hz)  ^
 +| 1     | 1F    | 6548,                      | 1042,21                 |
 +| 2     | 1T   | 15063,74                     | 2397,47                  |
 +| 3     | 2F    | 28660,44                     | 4561,45                  |
  
 +
 +===== Aube initiale =====
 +
 +L'**aube initiale** est définie par des paramètres spécifiques au LAVA[(cite:Kojtych_2022_Methodology>Kojtych S. //et al//. «Methodology for the Redesign of Compressor Blades Undergoing Nonlinear Structural Interactions: Application to Blade-Tip/Casing Contacts » 2022. Journal of Engineering for Gas Turbines and Power, Vol. 145, No. 5. {{ https://hal.archives-ouvertes.fr/hal-03795257|pdf}})] obtenus à partir du modèle CAO de l'aube de référence. L'aube initiale est classiquement utilisée comme point de départ dans le cadre de procédures d'optimisation; sa géométrie est similaire à celle de l'aube de référence.
 +
 +
 +==== Fréquences propres ====
 +Fréquences des trois premiers modes (noeuds du pied d'aube encastrés),
 +
 +  * pour le maillage complet :
 +
 +^ Mode  ^ Type  ^ Pulsation propre (rad/sec)  ^ Fréquence propre (Hz)  ^
 +| 1     | 1F    | 6612,49                      | 1052,41                  |
 +| 2     | 1T    | 15121,                     | 2406,71                  |
 +| 3     | 2F    | 28889,33                     | 4597,88                  |
 +
 +
 +  * pour le modèle réduit :
 +
 +^ Mode  ^ Type  ^ Pulsation propre (rad/sec)  ^ Fréquence propre (Hz)  ^
 +| 1     | 1F    | 6613,05                     | 1052,                 |
 +| 2     | 1T    | 15126,14                    | 2407,                 |
 +| 3     | 2F    | 28946,25                    | 4606,94                 |
 +
 +
 +
 +</pane>
 +</tabs>
  
  
  • public/modeles/rotor_23b/accueil.1663337585.txt.gz
  • Dernière modification : 2023/04/05 08:59
  • (modification externe)