Les deux révisions précédentes Révision précédente Prochaine révision | Révision précédente |
public:modeles:rotor_21:accueil [2023/03/19 20:49] – [Fréquences propres] ikrambeghdadi | public:modeles:rotor_21:accueil [2023/04/05 09:04] (Version actuelle) – modification externe 127.0.0.1 |
---|
**[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor21|Git project]]** | **[[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor21|Git project]]** |
</modal> | </modal> |
===== Original model ===== | ===== About ===== |
Rotor 21 is part of a research program to study the experimental performances of a stage when the design blade loading in the rotor tip region has been substantially reduced. In | Rotor 21 is part of a research program to study the experimental performances of a stage when the design blade loading in the rotor tip region has been substantially reduced. In |
order to produce the same overall pressure ratio as a reference stage (rotor 11), the blade loading levels in the midspan portion of the present rotor blade had to be relatively high. | order to produce the same overall pressure ratio as a reference stage (rotor 11), the blade loading levels in the midspan portion of the present rotor blade had to be relatively high. |
| |
* Original technical report [(cite:schmidt1978design>Schmidt. «Performance With and Without Inlet Radial Distortion of a Transonic Fan Stage Designed for Reduced Loading in the Tip Region » 1978. {{ https://ntrs.nasa.gov/citations/19780022114|pdf}})]: <code>@TechReport{schmidt1978design, | * Original technical report [(cite:schmidt1978design>Schmidt J. F., Ruggeri R. S. «Performance With and Without Inlet Radial Distortion of a Transonic Fan Stage Designed for Reduced Loading in the Tip Region » 1978. {{ https://ntrs.nasa.gov/citations/19780022114|pdf}})]: <code>@TechReport{schmidt1978design, |
author = {Schmidt, James F. and Ruggeri, Robert S.}, | author = {Schmidt, James F. and Ruggeri, Robert S.}, |
date = {1978}, | date = {1978}, |
* [[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor21|downloadable models]] (Git project) | * [[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor21|downloadable models]] (Git project) |
* {{ :public:modeles:rotor_21:rotor21.pdf | NASA technical report}} (.pdf) | * {{ :public:modeles:rotor_21:rotor21.pdf | NASA technical report}} (.pdf) |
* {{ :public:modeles:rotor_21:rotor21_original.csv | geometrical parameters file}} (.csv), usable as input of OpenMCAD[(cite:Kojtych_2022_gene_aubes>Kojtych S., Batailly A. «OpenMCAD, an open blade generator: from Multiple-Circular-Arc profiles to Computer-Aided Design model» 2022. {{ https://hal.science/hal-03923093|code en libre accès}})] to generate reference blade models. | * {{ :public:modeles:rotor_21:rotor21_original.csv | geometrical parameters file}} (.csv), usable as input of OpenMCAD[(cite:Kojtych_2022_gene_aubes>Kojtych S., Batailly A. «OpenMCAD, an open blade generator: from Multiple-Circular-Arc profiles to Computer-Aided Design model» 2022. {{ https://hal.science/hal-03923093|open source code}})] to generate reference blade models. |
</callout> | </callout> |
| |
===== Aerodynamic design ===== | ===== Aerodynamic design ===== |
| |
^ ^ unit ^ values ^ | ^ ^ unit ^ value ^ |
^ pressure ratio | [-] | 1.57 | | ^ pressure ratio | [-] | 1.57 | |
^ mass flow | [kg/s] | 29.5 | | ^ mass flow | [kg/s] | 29.5 | |
===== Material properties ===== | ===== Material properties ===== |
| |
The original material of the rotor 21 is not defined in the NASA report. | The original material of the rotor 21 is not defined in the NASA report. A generic titanium Ti-6Al-4V is considered: |
| |
Considered properties: Ti-6Al-4V, generic titanium : | ^ ^ unit ^ value ^ |
| |
^ ^ unité ^ valeurs ^ | |
^ alloy | [-] | Ti-6Al-4V | | ^ alloy | [-] | Ti-6Al-4V | |
^ Young's modulus | [GPa] | 108 | | ^ Young's modulus | [GPa] | 108 | |
Le rotor 21 fait partie d'un programme de recherche visant à étudier les performances expérimentales d'un étage de soufflante lorsque la charge des aubes dans la région de l'extrémité du rotor a été considérablement réduite. Afin de produire le même taux de compression global que l’étage de référence (rotor 11), les niveaux de charge des aubes dans la partie médiane de l’aube du rotor actuel ont été relativement augmentés. | Le rotor 21 fait partie d'un programme de recherche visant à étudier les performances expérimentales d'un étage de soufflante lorsque la charge des aubes dans la région de l'extrémité du rotor a été considérablement réduite. Afin de produire le même taux de compression global que l’étage de référence (rotor 11), les niveaux de charge des aubes dans la partie médiane de l’aube du rotor actuel ont été relativement augmentés. |
| |
* Rapport technique original [(cite:schmidt1978design>Schmidt. «Performance With and Without Inlet Radial Distortion of a Transonic Fan Stage Designed for Reduced Loading in the Tip Region » 1978. {{ https://ntrs.nasa.gov/citations/19780022114|pdf}})]: <code>@TechReport{schmidt1978design, | * Rapport technique original [(cite:schmidt1978design>)]: <code>@TechReport{schmidt1978design, |
author = {Schmidt, James F. and Ruggeri, Robert S.}, | author = {Schmidt, James F. and Ruggeri, Robert S.}, |
date = {1978}, | date = {1978}, |
* [[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor21|modèles téléchargeables]] (lien vers projet Git) | * [[https://gitlab.lava.polymtl.ca/depots_publics/modeles/catalogue_aubes/-/tree/master/rotor21|modèles téléchargeables]] (lien vers projet Git) |
* {{ :public:modeles:rotor_21:rotor21.pdf | rapport technique original}} de la NASA (.pdf) | * {{ :public:modeles:rotor_21:rotor21.pdf | rapport technique original}} de la NASA (.pdf) |
* {{ :public:modeles:rotor_21:rotor21_original.csv | fichier de paramètres géométriques}} (.csv), utilisable en entrée de OpenMCAD[(cite:Kojtych_2022_gene_aubes>Kojtych S., Batailly A. «OpenMCAD, an open blade generator: from Multiple-Circular-Arc profiles to Computer-Aided Design model» 2022. {{ https://hal.science/hal-03923093|code en libre accès}})] pour générer l'aube de référence | * {{ :public:modeles:rotor_21:rotor21_original.csv | fichier de paramètres géométriques}} (.csv), utilisable en entrée de OpenMCAD[(cite:Kojtych_2022_gene_aubes>)] pour générer l'aube de référence |
</callout> | </callout> |
| |
===== Propriétés matériau ===== | ===== Propriétés matériau ===== |
| |
Le matériau original du rotor 21 n'est pas défini dans le rapport de la NASA. | Le matériau original du rotor 21 n'est pas défini dans le rapport de la NASA. Un alliage de titane Ti-6Al-4v est considéré : |
| |
Propriétés considérées : alliage de titane Ti-6Al-4v : | |
| |
^ ^ unité ^ valeurs ^ | ^ ^ unité ^ valeurs ^ |
| |
| |
</tabs> | |
</pane> | </pane> |
| |
| </tabs> |
| |
| |