Différences
Ci-dessous, les différences entre deux révisions de la page.
Les deux révisions précédentes Révision précédente Prochaine révision | Révision précédente Prochaine révisionLes deux révisions suivantes | ||
public:modeles:rotor_65:accueil [2023/04/01 21:46] – ikrambeghdadi | public:modeles:rotor_65:accueil [2023/04/14 14:40] – solenekojtych | ||
---|---|---|---|
Ligne 14: | Ligne 14: | ||
===== About ===== | ===== About ===== | ||
- | <fc # | + | This report presents the overall and blade-element performances of the scaled fan |
+ | stage. The stage was designated "stage 65" for tests in the Lewis facility. Data were | ||
+ | obtained at speeds of 40 to 100 percent of design speed. Blade-element survey data were | ||
+ | taken at 11 radial positions for the inlet guide vanes and the rotor, at 7 radial positions | ||
+ | for the bypass stator, and at 3 radial positions for the core stator. The data presented | ||
+ | in this report are in tabular as well as plotted form. | ||
- | * Original NASA technical report [(cite: | + | * Original NASA technical report [(cite: |
author | author | ||
date = {1976}, | date = {1976}, | ||
Ligne 25: | Ligne 30: | ||
</ | </ | ||
- | <fc #ff0000> * Pictures | + | * Picture : |
- | + | {{ : | |
+ | <caption>Fig1. https:// | ||
<callout type=" | <callout type=" | ||
* [[https:// | * [[https:// | ||
* {{ : | * {{ : | ||
- | * {{ | geometrical parameters file}} (.csv), usable as input of OpenMCAD[(cite: | + | * {{: |
</ | </ | ||
Ligne 44: | Ligne 49: | ||
The geometry of rotor 65 is described in the [[https:// | The geometry of rotor 65 is described in the [[https:// | ||
- | <fc # | + | {{ : |
==== Aerodynamic design | ==== Aerodynamic design | ||
- | <fc # | ||
- | ^ ^ unit ^ value ^ | ||
- | ^ pressure ratio | [-] | 1.53 | | ||
- | ^ mass flow | ||
- | ^ tip speed | ||
- | ^ tip solidity | ||
- | ^ aspect ratio | [-] | 3.6 | | ||
- | ^ rotative speed | [rad/ | ||
- | ==== Material properties | + | ^ ^ units ^ values |
+ | ^ pressure ratio | [-] | 1.679 | | ||
+ | ^ mass flow | ||
+ | ^ tip speed | ||
+ | ^ aspect ratio | [-] | 1.679 | | ||
+ | ^ rotative speed | [rad/ | ||
- | <fc #ff0000>The material of rotor 1 is not defined in the original NASA report. A 200-grade maraging steel is considered:</fc> | + | ==== Material properties |
+ | The material of the rotor 65 is titanium according to the report, but its characteristics are not provided. A generic titanium Ti-6Al-4V is considered: | ||
- | ^ | + | ^ |
^ alloy | [-] | 18-Ni-200-maraging | ^ alloy | [-] | 18-Ni-200-maraging | ||
^ Young' | ^ Young' | ||
Ligne 143: | Ligne 146: | ||
===== À propos ===== | ===== À propos ===== | ||
- | <fc # | + | Ce rapport présente les performances globales et des pales du ventilateur à l' |
+ | organiser. L' | ||
+ | obtenu à des vitesses de 40 à 100 % de la vitesse de conception. Les données d' | ||
+ | pris en 11 positions radiales pour les aubes directrices d' | ||
+ | pour le stator de dérivation, | ||
+ | dans ce rapport sont présentés sous forme de tableaux et de graphiques. | ||
* Rapport technique original [(cite: | * Rapport technique original [(cite: | ||
Ligne 154: | Ligne 162: | ||
} | } | ||
</ | </ | ||
- | * Photographies | + | * Photographie |
- | <fc #ff0000>image</fc> | + | {{ : |
+ | <caption>Fig1. https:// | ||
<callout type=" | <callout type=" | ||
* [[https:// | * [[https:// | ||
* {{ : | * {{ : | ||
- | * {{ | fichier de paramètres géométriques}} (.csv), utilisable en entrée de OpenMCAD[(cite: | + | * {{ : |
</ | </ | ||
Ligne 173: | Ligne 182: | ||
La géométrie du rotor 65 est décrite dans le [[https:// | La géométrie du rotor 65 est décrite dans le [[https:// | ||
- | <fc # | + | {{ : |
- | ==== C<fc # | + | |
+ | ==== Caractéristiques | ||
^ ^ unité | ^ ^ unité | ||
- | ^ taux de compression | + | ^ taux de compression |
- | ^ débit massique | + | ^ débit massique |
- | ^ vitesse en tête | [m/s] | 350,8 | | + | ^ vitesse en tête | [m/s] | 419.1 | |
- | ^ solidité en tête | + | ^ allongement |
- | ^ allongement | + | ^ vitesse de rotation |
- | ^ vitesse de rotation | + | |
+ | |||
==== Propriétés matériau | ==== Propriétés matériau | ||
- | <fc #ff0000>Le matériau | + | Le matériau du rotor 65 est le titane d' |
^ | ^ |
- public/modeles/rotor_65/accueil.txt
- Dernière modification : 2023/04/14 15:21
- de solenekojtych