Différences
Ci-dessous, les différences entre deux révisions de la page.
Les deux révisions précédentes Révision précédente Prochaine révision | Révision précédente Prochaine révisionLes deux révisions suivantes | ||
public:modeles:rotor_65:accueil [2023/04/01 23:45] – [Géométrie] ikrambeghdadi | public:modeles:rotor_65:accueil [2023/04/14 14:41] – [Tableau] solenekojtych | ||
---|---|---|---|
Ligne 21: | Ligne 21: | ||
in this report are in tabular as well as plotted form. | in this report are in tabular as well as plotted form. | ||
- | * Original NASA technical report [(cite: | + | * Original NASA technical report [(cite: |
author | author | ||
date = {1976}, | date = {1976}, | ||
Ligne 37: | Ligne 37: | ||
* [[https:// | * [[https:// | ||
* {{ : | * {{ : | ||
- | * {{ | geometrical parameters file}} (.csv), usable as input of OpenMCAD[(cite: | + | * {{: |
</ | </ | ||
Ligne 49: | Ligne 49: | ||
The geometry of rotor 65 is described in the [[https:// | The geometry of rotor 65 is described in the [[https:// | ||
- | {{ : | + | {{ : |
==== Aerodynamic design | ==== Aerodynamic design | ||
- | <fc # | ||
- | ^ ^ unit ^ value ^ | ||
- | ^ pressure ratio | [-] | 1.53 | | ||
- | ^ mass flow | ||
- | ^ tip speed | ||
- | ^ tip solidity | ||
- | ^ aspect ratio | [-] | 3.6 | | ||
- | ^ rotative speed | [rad/ | ||
- | ==== Material properties | + | ^ ^ units ^ values |
+ | ^ pressure ratio | [-] | 1.679 | | ||
+ | ^ mass flow | ||
+ | ^ tip speed | ||
+ | ^ aspect ratio | [-] | 1.679 | | ||
+ | ^ rotative speed | [rad/ | ||
- | <fc #ff0000>The material of rotor 1 is not defined in the original NASA report. A 200-grade maraging steel is considered:</fc> | + | ==== Material properties |
+ | The material of the rotor 65 is titanium according to the report, but its characteristics are not provided. A generic titanium Ti-6Al-4V is considered: | ||
- | ^ | + | ^ |
^ alloy | [-] | 18-Ni-200-maraging | ^ alloy | [-] | 18-Ni-200-maraging | ||
^ Young' | ^ Young' | ||
Ligne 171: | Ligne 169: | ||
* [[https:// | * [[https:// | ||
* {{ : | * {{ : | ||
- | * {{ | fichier de paramètres géométriques}} (.csv), utilisable en entrée de OpenMCAD[(cite: | + | * {{ : |
</ | </ | ||
Ligne 184: | Ligne 182: | ||
La géométrie du rotor 65 est décrite dans le [[https:// | La géométrie du rotor 65 est décrite dans le [[https:// | ||
- | {{ : | + | {{ : |
- | ==== C<fc # | + | ==== Caractéristiques |
^ ^ unité | ^ ^ unité | ||
- | ^ taux de compression | + | ^ taux de compression |
- | ^ débit massique | + | ^ débit massique |
- | ^ vitesse en tête | [m/s] | 350,8 | | + | ^ vitesse en tête | [m/s] | 419.1 | |
- | ^ solidité en tête | + | ^ allongement |
- | ^ allongement | + | ^ vitesse de rotation |
- | ^ vitesse de rotation | + | |
+ | |||
==== Propriétés matériau | ==== Propriétés matériau | ||
- | <fc #ff0000>Le matériau | + | Le matériau du rotor 65 est le titane d' |
^ | ^ | ||
Ligne 230: | Ligne 231: | ||
Fréquences des trois premiers modes (noeuds du pied d'aube encastrés) pour le maillage obtenu avec OpenMCAD[(cite: | Fréquences des trois premiers modes (noeuds du pied d'aube encastrés) pour le maillage obtenu avec OpenMCAD[(cite: | ||
- | ^ Mode ^ Type ^ Pulsation propre (rad/ | + | ^ Mode ^ Type ^ Pulsation propre (rad/ |
- | | 1 | | 861, | + | | 1 |
- | | 2 | | 3216, | + | | 2 |
- | | 3 | | 4954, | + | | 3 |
Ligne 246: | Ligne 247: | ||
* pour le maillage complet : | * pour le maillage complet : | ||
- | ^ Mode ^ Type ^ Pulsation propre (rad/ | + | ^ Mode ^ Type ^ Pulsation propre (rad/ |
- | | 1 | + | | 1 | | 843, |
- | | 2 | + | | 2 | | 3125, |
- | | 3 | + | | 3 | | 4970, |
Ligne 255: | Ligne 256: | ||
* pour le modèle réduit : | * pour le modèle réduit : | ||
- | ^ Mode ^ Type ^ Pulsation propre (rad/ | + | ^ Mode ^ Type ^ Pulsation propre (rad/ |
- | | 1 | | 843, | + | | 1 |
- | | 2 | | 3125, | + | | 2 |
- | | 3 | | 4971, | + | | 3 |
- public/modeles/rotor_65/accueil.txt
- Dernière modification : 2023/04/14 15:21
- de solenekojtych