Différences
Ci-dessous, les différences entre deux révisions de la page.
Les deux révisions précédentes Révision précédente Prochaine révision | Révision précédente | ||
public:modeles:rotor_65:accueil [2023/04/14 14:40] – [Tableau] solenekojtych | public:modeles:rotor_65:accueil [2023/04/14 15:21] (Version actuelle) – [Tableau] solenekojtych | ||
---|---|---|---|
Ligne 14: | Ligne 14: | ||
===== About ===== | ===== About ===== | ||
- | This report presents the overall and blade-element performances of the scaled fan | + | |
- | stage. The stage was designated " | + | Rotor 65 is part of a NASA research program |
- | obtained at speeds | + | |
- | taken at 11 radial positions for the inlet guide vanes and the rotor, at 7 radial positions | + | |
- | for the bypass stator, and at 3 radial positions for the core stator. The data presented | + | |
- | in this report are in tabular as well as plotted form. | + | |
* Original NASA technical report [(cite: | * Original NASA technical report [(cite: | ||
Ligne 32: | Ligne 28: | ||
* Picture : | * Picture : | ||
{{ : | {{ : | ||
- | < | + | < |
<callout type=" | <callout type=" | ||
Ligne 61: | Ligne 57: | ||
==== Material properties | ==== Material properties | ||
- | The material of the rotor 65 is titanium according to the report, but its characteristics are not provided. A generic titanium Ti-6Al-4V is considered: | + | The material of the rotor 65 is titanium according to the report, but its characteristics are not provided. |
- | + | ||
- | ^ | + | |
- | ^ alloy | [-] | 18-Ni-200-maraging | + | |
- | ^ Young' | + | |
- | ^ density | + | |
- | ^ Poisson' | + | |
- | ^ yield stress | + | |
+ | ^ ^ units ^ values | ||
+ | ^ alloy | [-] | Ti-6Al-4V | ||
+ | ^ Young' | ||
+ | ^ density | ||
+ | ^ Poisson' | ||
+ | ^ yield stress | ||
==== CAD model ==== | ==== CAD model ==== | ||
Ligne 95: | Ligne 90: | ||
First three natural frequencies (with clamped root) for the mesh computed with OpenMCAD[(cite: | First three natural frequencies (with clamped root) for the mesh computed with OpenMCAD[(cite: | ||
- | ^ Mode ^ <fc #ff0000>Type</ | + | ^ Mode ^ Type ^ Natural angular frequency (rad/ |
- | | 1 | + | | 1 |
- | | 2 | + | | 2 |
- | | 3 | + | | 3 |
Ligne 115: | Ligne 110: | ||
* from the whole mesh: | * from the whole mesh: | ||
- | ^ Mode ^ <fc #ff0000>Type</ | + | ^ Mode ^ Type ^ Natural angular frequency (rad/ |
- | | 1 | + | | 1 |
- | | 2 | + | | 2 |
- | | 3 | + | | 3 |
* from the reduced order model: | * from the reduced order model: | ||
- | ^ Mode ^ <fc #ff0000>Type</ | + | ^ Mode ^ Type ^ Natural angular frequency (rad/ |
- | | 1 | + | | 1 |
- | | 2 | + | | 2 |
- | | 3 | + | | 3 |
Ligne 146: | Ligne 141: | ||
===== À propos ===== | ===== À propos ===== | ||
- | Ce rapport présente les performances globales et des pales du ventilateur à l' | + | Le rotor 65 a été étudié |
- | organiser. L' | + | |
- | obtenu à des vitesses de 40 à 100 % de la vitesse de conception. Les données d' | + | |
- | pris en 11 positions radiales | + | |
- | pour le stator de dérivation, | + | |
- | dans ce rapport sont présentés sous forme de tableaux et de graphiques. | + | |
* Rapport technique original [(cite: | * Rapport technique original [(cite: | ||
Ligne 164: | Ligne 154: | ||
* Photographie : | * Photographie : | ||
{{ : | {{ : | ||
- | < | + | < |
<callout type=" | <callout type=" | ||
Ligne 198: | Ligne 188: | ||
==== Propriétés matériau | ==== Propriétés matériau | ||
- | Le matériau du rotor 65 est le titane d' | + | Le matériau du rotor 65 est le titane d' |
- | + | ^ | |
- | ^ | + | ^ alliage |
- | ^ alliage | + | ^ module d' |
- | ^ module d' | + | ^ masse volumique |
- | ^ masse volumique | + | ^ coefficient de Poisson |
- | ^ coefficient de Poisson | + | ^ limite élastique |
- | ^ limite élastique | + | |
==== Modèle CAO ==== | ==== Modèle CAO ==== | ||
Ligne 231: | Ligne 220: | ||
Fréquences des trois premiers modes (noeuds du pied d'aube encastrés) pour le maillage obtenu avec OpenMCAD[(cite: | Fréquences des trois premiers modes (noeuds du pied d'aube encastrés) pour le maillage obtenu avec OpenMCAD[(cite: | ||
- | ^ Mode ^ Type ^ Pulsation propre (rad/ | + | ^ Mode ^ Type ^ Pulsation propre (rad/ |
- | | 1 | + | | 1 |
- | | 2 | + | | 2 |
- | | 3 | + | | 3 |
Ligne 248: | Ligne 237: | ||
^ Mode ^ Type ^ Pulsation propre (rad/ | ^ Mode ^ Type ^ Pulsation propre (rad/ | ||
- | | 1 | | 843, | + | | 1 |
- | | 2 | | 3125, | + | | 2 |
- | | 3 | | 4970, | + | | 3 |
Ligne 256: | Ligne 245: | ||
* pour le modèle réduit : | * pour le modèle réduit : | ||
- | ^ Mode ^ Type ^ Pulsation propre (rad/ | + | ^ Mode ^ Type ^ Pulsation propre (rad/ |
- | | 1 | + | | 1 |
- | | 2 | + | | 2 |
- | | 3 | + | | 3 |
- public/modeles/rotor_65/accueil.1681497643.txt.gz
- Dernière modification : 2023/04/14 14:40
- de solenekojtych